’65 Prince TM – Fractal Tone Match Presets (Axe-FX III, FM3, FM9)

INCUDED PRESETS

This download includes patches for Axe-FX III, FM3, and FM9. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

The pack includes 2 presets (each with SC and HB options). For the ‘A’ presets, we tone matched the amp using an Alessandro/Eminence 10” GA64 speaker. For the ‘O’ presets, we tone matched the amp through a vintage 60’s 10” Oxford speaker. The ‘A’ patches are a bit brighter and more scooped. 

• 65 Prince A/O TM WT SC – This patch uses the IR’s and is meant for guitars with single coils.
• 65 Prince A/O TM WT HB – This patch uses the IR’s and is meant for guitars with humbuckers.
• NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

OUR VINTAGE 1965 PRINCETON (NON REVERB), NOW IN YOUR FRACTAL HARDWARE

For these patches, we tone-matched the stock Fractal amp models to our vintage 1965 Fender Princeton (non-reverb) amplifier. The result is a set of User Cabs that completely transform the Fractal amp models, making the Fractal hardware sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

This is a pristine example of a vintage ’65 black-panel non-reverb Princeton. The non-reverb Princeton’s have quite a different gain stage than the Princeton Reverbs. The Reverb circuit adds a gain stage which makes them break up a lot sooner. The non-reverb Princeton’s stay clean much longer. They have a slightly different tonal response, too.

Our amp has a 10” Alessandro/Eminence GA64 speaker, which is voiced like the vintage 60’s speakers used in these combos. We also tone-matched the amp through a vintage 60’s 10” Oxford speaker.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch (POG)
4. Drives: KOT, 808, Zendrive
5. Volume
6. Tremolo
7. Chorus
8. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
9. Reverbs: Hall (subtle), Dynamic Hall (huge)
10. Amps
11. IR (Tone Match)
12. EQ
13. Output

The FM3 presets cannot fit all the effects into a single patch. For that platform, we include the amp and essential effects in the main presets, and then we include the additional effects blocks in the ‘FX’ preset. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

BLOCK CHANNELS

For each effect block, we set up all four channels to give you as many options as possible for each individual effect types. For example, in the Compressor block, there are four different types of compression. For drives, we use all available channels in each drive block to get different overdrive flavors. Please experiment with the channels in all the different blocks to find your favorites. Typically we use our favorites in Channel A.

The exceptions to this are usually the amp and cab blocks – for those we usually only set up Channel A.

SCENES

The following scenes are set up for instant access to various tones:

• SCENE 1: CLEAN. Base clean tone
• SCENE 2: DRIVE. Stage 1 drive tone
• SCENE 3: DRIVE+. Big rhythm tone
• SCENE 4: P&W LEAD. Lead tone with lots of delay and verb
• SCENE 5: AMBI CLEAN. Clean tone with lots of delay and verb
• SCENE 6: CLEAN TREM. Clean tone with tremolo
• SCENE 7: CLEAN CHORUS. Ambient clean tone with chorus
• SCENE 8: SWELLS. Big ambient swells tone