Sale!

65A LNDN – Kemper Profile and Performance Pack

$14.99

Kemper Profile and Performance pack based on a 65 Amps London

Category: SKU: KPR-024

Description

THE AMP

This pack includes profiles and performances of a blue label hand-wired 65 Amps London.

The London is a hand-wired boutique two-channel amplifier built as a collaboration between 65 Amps and Peter Stroud. The EF86 (Coulor) channel is loosely based on a 60’s AC15, while the 12ax7 (Tremolo) channel is based a 60’s Marshall 1974x. You get big warm tones with plenty of chime and grit between the two different channel options.

We’ve profiled both channels of the amp through the matching 65 Amps 2×12 cabinet loaded with a 70th Anniversary Celestion G12H30 and Celestion Alnico Blue. We mic’d the amp with a Royer 121 and Earthworks SR25 through a stereo Neve 1073 preamp.

The result is a perfect representation of this very special amp for the Kemper Profiler.

THE PROFILES

The profiles increase through the entire gain range of the amp for all channel options. See the notes below on how to adjust these profiles to fit your guitars and playing style.

PERFORMANCES

This pack includes a fully featured performance for speaker options, with options for both single coil and humbucker equipped guitars. We’ve used the Vibrato input profiles (our favorite) for the performance.

We’ve set up these performances to use all five slots and all four effects buttons of the Kemper Remote/Stage with morph functions in all slots. Here are the slots and associated effects:

SLOT 1: CLEAN-ISH

This is your clean tone, but we set it up so that it breaks up on the bridge pickup, as long as your pickup has moderate output. Here are the effects in the different slots:

  1. EFFECTS 1: Tremolo (off by default)
  2. EFFECTS 2: Pure Booster (off by default – gives you a bit of drive)
  3. EFFECTS 3: Quarter Note Delay (off by default)
  4. EFFECTS 4: Dotted 8th Note Delay (on by default)

MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.

PROFILE USED: 65A LNDN EF/AX 2

SLOT 2: DRIVE 1

This slot gives you two levels of overdrive. It’s default tone is a light to medium-light level of drive (depending on how hot your pickups are). Hit the boost, and you’ve got a bit more gain on tap. The overdrive in this slot is provided by the Kemper Drive effect.

  1. EFFECTS 1: Tremolo (off by default)
  2. EFFECTS 2: Pure Booster (off by default)
  3. EFFECTS 3: 8th Note Delay (off by default)
  4. EFFECTS 4: Dotted 8th Note Delay (on by default)

MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.

PROFILE USED: 65A LNDN EF/AX 2

SLOT 3: DRIVE 2

This slot gives you two more levels of overdrive, both louder than the biggest setting in ‘Drive 1’. It’s default sound is a big rhythm drive tone. You can add more gain with the boost on Effects 2.

  1. EFFECTS 1: Tremolo (off by default)
  2. EFFECTS 2: Pure Booster (off by default)
  3. EFFECTS 3: 8th Note Delay (on by default)
  4. EFFECTS 4: Dotted 8th Note Delay (off by default)

MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.

PROFILE USED: 65A LNDN EF/AX 3

SLOT 4: LEAD

For our Lead tone, we set up a big gain sound with a level boost above the biggest drive sound in ‘Drive 2’. You’re guitar will lift nicely in the mix. Here are the effects available via the effects buttons: 

  1. EFFECTS 1: Analog Octaver (off by default) – this adds a subtle low octave that will add a lot of body to your leads.
  2. EFFECTS 2: Pure Booster (off by default)
  3. EFFECTS 3: Quarter Note Delay (on by default)
  4. EFFECTS 4: Dual Delay – 8th and dotted 8th (on by default)

MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.

PROFILE USED: 65A LNDN EF/AX 3

SLOT 5: AMBI/SWELL

This slot can be used for volume swells or for super ambient playing (without swells). The delays and reverbs trail for a very long time – proceed with caution :).

  1. EFFECTS 1: Tremolo (off by default).
  2. EFFECTS 2: Pure Booster (off by default)
  3. EFFECTS 3: Crystal Delay (on by default) – this delay creates an awesome Shimmer reverb sound.
  4. EFFECTS 4: Dual Delay – 8th and dotted 8th (on by default)

MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb morph adds more shimmer, and the delays increase in both level and feedback.

PROFILE USED: 65A LNDN EF/AX 2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.