Description
THE AMP
This pack includes profiles and performances of a vintage 1965 Fender Princeton (non-reverb) amplifier
The Telstar is one of our absolute favorite amps here at Worship Tutorials. It is Fender voiced, but it’s very unique. The cleans are beautiful and full – very three dimensional. And when push the amp with drive, the breakup is tight and refined.
The Telstar has a voice knob, allowing you to switch between ’53 and ’58. The ’53 voice is more scooped and clean (think black panel Fender), and the ’58 voice is more forward both in the mids and in gain (think Fender Tweed). Keep in mind, the Fender references are just that – a reference – this amp’s voice is very unique.
We’ve profiled both voices of the amp. We mic’d the amp with a Royer 121 and Earthworks SR25 through a stereo Neve 1073 preamp.
The result is a perfect representation of this very special amp for the Kemper Profiler.
THE PROFILES
The profiles increase through the entire gain range of the amp for all channel options. See the notes below on how to adjust these profiles to fit your guitars and playing style.
PERFORMANCES
This pack includes a fully featured performance for speaker options, with options for both single coil and humbucker equipped guitars. We’ve used the Vibrato input profiles (our favorite) for the performance.
We’ve set up these performances to use all five slots and all four effects buttons of the Kemper Remote/Stage with morph functions in all slots. Here are the slots and associated effects:
SLOT 1: CLEAN-ISH
This is your clean tone, but we set it up so that it breaks up on the bridge pickup, as long as your pickup has moderate output. Here are the effects in the different slots:
- EFFECTS 1: Tremolo (off by default)
- EFFECTS 2: Pure Booster (off by default – gives you a bit of drive)
- EFFECTS 3: Quarter Note Delay (off by default)
- EFFECTS 4: Dotted 8th Note Delay (on by default)
MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.
PROFILE USED: Car Star 53/58 2
SLOT 2: DRIVE 1
This slot gives you two levels of overdrive. It’s default tone is a light to medium-light level of drive (depending on how hot your pickups are). Hit the boost, and you’ve got a bit more gain on tap. The overdrive in this slot is provided by the Kemper Drive effect.
- EFFECTS 1: Tremolo (off by default)
- EFFECTS 2: Pure Booster (off by default)
- EFFECTS 3: 8th Note Delay (off by default)
- EFFECTS 4: Dotted 8th Note Delay (on by default)
MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.
PROFILE USED: Car Star 53/58 2
SLOT 3: DRIVE 2
This slot gives you two more levels of overdrive, both louder than the biggest setting in ‘Drive 1’. It’s default sound is a big rhythm drive tone. You can add more gain with the boost on Effects 2.
- EFFECTS 1: Tremolo (off by default)
- EFFECTS 2: Pure Booster (off by default)
- EFFECTS 3: 8th Note Delay (on by default)
- EFFECTS 4: Dotted 8th Note Delay (off by default)
MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.
PROFILE USED: Car Star 53/58 3
SLOT 4: LEAD
For our Lead tone, we set up a big gain sound with a level boost above the biggest drive sound in ‘Drive 2’. You’re guitar will lift nicely in the mix. Here are the effects available via the effects buttons:
- EFFECTS 1: Analog Octaver (off by default) – this adds a subtle low octave that will add a lot of body to your leads.
- EFFECTS 2: Pure Booster (off by default)
- EFFECTS 3: Quarter Note Delay (on by default)
- EFFECTS 4: Dual Delay – 8th and dotted 8th (on by default)
MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb goes into a big ambient verb sound, and the delays increase in both level and feedback.
PROFILE USED: Car Star 53/58 3
SLOT 5: AMBI/SWELL
This slot can be used for volume swells or for super ambient playing (without swells). The delays and reverbs trail for a very long time – proceed with caution :).
- EFFECTS 1: Tremolo (off by default).
- EFFECTS 2: Pure Booster (off by default)
- EFFECTS 3: Crystal Delay (on by default) – this delay creates an awesome Shimmer reverb sound.
- EFFECTS 4: Dual Delay – 8th and dotted 8th (on by default)
MORPH: Morphing will increase the wetness of both the reverb and delays. The reverb morph adds more shimmer, and the delays increase in both level and feedback.
PROFILE USED: Car Star 53/58 2
Reviews
There are no reviews yet.