BadKat C40 – Tone Match Gen2 Presets and Captures

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

By default, the patch includes both the 12ax7 channel and EF86 channel in a stereo configuration (POD Go has separate patches for each channel). This is sort of like jumping the amp (which isn’t actually possible with the real amp). If you would like just the 12ax7 channel to be represented in the patch, simply copy and paste the top amp and IR blocks into the bottom amp and IR blocks. If you would like just the EF86 channel to be represented in the patch, simply copy the bottom amp and IR blocks into the top amp and IR blocks.

This download includes patches for Helix, HX Stomp, and POD Go. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

You get two sets of patches (each with SC and HB options). One for the 12ax7 channel, and one for the EF86 channel.

• BdKt C40 A/E TM2 S – This patch uses the IR’s and is meant for guitars with single coils (A=12ax7, E=EF86).
• BdKt C40 A/E TM2 H – This patch uses the IR’s and is meant for guitars with humbuckers (A=12ax7, E=EF86).
• NOTE: The HX Stomp and POD Go folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix patch.
  

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch (POG)
4. Drives
5. Volume – mapped to EXP 2
6. Modulation
7. Delays
8. Reverbs
9. Amps
10. IRs (Tone Match)
11. EQ
12. Solo Boost
13. Output

The HX Stomp and POD Go patches cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

• Snapshot 1: CLEAN. This is the base clean tone with delay.
• Snapshot 2: DRIVE. Light overdrive.
• Snapshot 3: DRIVE +: Bigger overdrive
• Snapshot 4: P&W LEAD – Lead tone with lots of reverb and delay
• Snapshot 5: AMBI CLEAN – Ambient Clean tone
• Snapshot 6: 80s CLEAN– Clean tone with chorus
• Snapshot 7: FUZZ – Big gain fuzz tone
• Snapshot 8: SWELLS – Big ambient swells

POD Go:

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots

Fractal Presets available for Axe-FX III, FM3, and FM9

This download includes patches for Axe-FX III, FM3, and FM9. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

1. BadKat C40 TM WT (SC)– this preset is voiced for single coils and low-output humbuckers
2. BadKat C40 TM WT (HB) – this preset is voiced for more traditional humbuckers

NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch (POG)
4. Drives: KOT, 808, Fuzz
5. Volume – mapped to EXP 2
6. Tremolo
7. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
8. Chorus
9. Reverbs: Hall (subtle), Dynamic Hall (huge)
10. Amp
11. IR (Tone Match)
12. EQ
13. Solo Boost
14. Output-

SCENES

The following scenes are set up for instant access to various tones:

• Scene 1: CLEAN. Basic clean tone with verb and quarter delay
• Scene 2: DRIVE. Light Drive (Drive 1A)
• Scene 3: DRIVE+. Med Drive (Drive A, Control Switch 1)
• Scene 4: P&W LEAD. Big lead tone with delay and reverb
• Scene 5: AMBI CLEAN. Clean tone with stereo delay (1/4 + 1/8d) and big reverb.
• Scene 6: 80’s CLEAN. Clean tone with CHORUS
• Scene 7: FUZZ. Big fuzz tone
• Scene 8: SWELLS. Big ambient tones

TONEX AMP CAPTURE PRESETS – Compatible with the Tonex/Amplitube Software and the TONEX pedal

For Tonex, we have captured the amp through its entire gain range of the amp for both the ’12ax7′ and ‘EF86’ channels. The Amp Model Presets and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amp for both the 12ax7 and EF86 channels. The captures and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (WorshipTutorials) will follow you on the app.
2. Follow ‘WorshipTutorials’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

For Kemper, we have profiled the amp through its entire gain range of the amp. The Profiles and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 profiles.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances with options for both single coils and humbuckers.

Coming soon…