Ally Deluxe – Tone Match patches (Line 6, Fractal, Kemper, TONEX, Headrush Prime)

$14.99

Line 6, Fractal, Kemper, TONEX, and Headrush Prime presets based on our vintage 1964 Vox AC30 Top Boost amplifier

Available for:

  • Line 6 Helix, HX Stomp, POD Go
  • Fractal Axe-FX III, FM3, and FM9
  • TONEX and Amplitube (Coming soon)
  • Headrush Prime
  • Kemper (Profiler and Stage)

Description

TONE MATCH PATCHES, CAPTURES, AND PROFILES OF OUR FENDER/ALESSANDRO DELUXE REVERB

For these presets, we have captured our Fender/Alessandro Deluxe Reverb. The result is set of presets and captures that sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

George Alessandro is an amp builder/tech who takes stock Fender amps and completely re-builds them by hand. For the ’65 Deluxe Reverb, he hand-wires the amp to 1965 specs with only the best of the best components. The result is a modern amp that sounds just like they did off the production line in 1965.

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

This download includes patches for Helix, HX Stomp, and POD Go. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

  • Ally DLX TM WT S – This patch uses the IR’s and is meant for guitars with single coils.
  • Ally DLX TM WT H – This patch uses the IR’s and is meant for guitars with humbuckers.
  • NOTE: The HX Stomp, POD Go, and FM3 folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix/AXE-FX III patches.

SIGNAL FLOW AND EFFECTS

  1. Input
  2. Compressor
  3. Drives: KOT (yellow and red side), 808
  4. Volume – mapped to EXP 2
  5. Tremolo
  6. Chorus
  7. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  8. Reverbs: Hall (subtle), Dynamic Hall (huge)
  9. Amps
  10. IR (Tone Match)
  11. EQ
  12. Solo Boost
  13. Output

The HX Stomp and POD Go presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

  • Snapshot 1: CLEAN. Base clean tone
  • Snapshot 2: DRIVE. Stage 1 drive tone
  • Snapshot 3: DRIVE+. Big rhythm tone
  • Snapshot 4: P&W LEAD. Lead tone with lots of delay and verb
  • Snapshot 5: AMBI CLEAN. Clean tone with lots of delay and verb
  • Snapshot 6: CLEAN TREM. Clean tone with tremolo
  • Snapshot 7: CLEAN CHORUS. Ambient clean tone with chorus
  • Snapshot 8: SWELLS. Big ambient swells tone

POD Go:

  • Snapshot 1: CLEAN. Base clean tone
  • Snapshot 2: DRIVE. Stage 1 drive tone
  • Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
  • Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots

Fractal Presets available for Axe-FX III, FM3, and FM9

This download includes patches for Axe-FX III, FM3, and FM9. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

  • Ally DLX TM WT SC – This patch uses the IR’s and is meant for guitars with single coils.
  • Ally DLX TM WT HB – This patch uses the IR’s and is meant for guitars with humbuckers.
  • NOTE: The FM3 folders include ‘FX” patches. These patches include the additional effects blocks from the full AXE-FX III patches.

SIGNAL FLOW AND EFFECTS

  1. Input
  2. Compressor
  3. Pitch (POG)
  4. Drives: KOT (yellow and red), 808
  5. Volume
  6. Tremolo
  7. Chorus
  8. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  9. Reverbs: Hall (subtle), Dynamic Hall (huge)
  10. Amps
  11. IR (Tone Match)
  12. EQ
  13. Solo Boost
  14. Output

The FM3 presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SCENES

  • SCENE 1: CLEAN. Base clean tone
  • SCENE 2: DRIVE. Stage 1 drive tone
  • SCENE 3: DRIVE+. Big rhythm tone
  • SCENE 4: P&W LEAD. Lead tone with lots of delay and verb
  • SCENE 5: AMBI CLEAN. Clean tone with lots of delay and verb
  • SCENE 6: CLEAN TREM. Clean tone with tremolo
  • SCENE 7: CLEAN CHORUS. Ambient clean tone with chorus
  • SCENE 8: SWELLS. Big ambient swells tone

COMING SOON…

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

The profiles increase through the entire gain range of the amp for all channel options. The Vibrato input profiles are denoted with a ‘Vib’, and the Normal channel profiles with an ’Nrm’.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances with options for both single coils and humbuckers.

HEADRUSH PRIME (not compatible with other Headrush units)

For Headrush Prime, we’ve included both rigs (patches) and amp clone(s). The Amp Clone is from the Brilliant channel of the amp (our favorite), and we’ve built both a ‘SC’ and ‘HB’ rig around the amp clone.

Headrush Prime Signal Flow:

  1. Input
  2. Compressor
  3. Pitch
  4. Overdrives
  5. Volume
  6. Amp Clone
  7. Tremolo
  8. Chorus
  9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  10. Reverbs: Subtle and Ambient
  11. Output

FOOTSWITCH CONFIGURATION

We’ve programmed the switches on the Headrush Prime to act like a traditional pedalboard. You’ll see individual effects mapped to the different buttons and labeled appropriately. If you’d like to make changes, the process is simple – the Headrush Prime manual provides great documentation if you’d like to create scenes or other button mapping.

Additional information

Platform

Line 6 (Helix, HX Stomp, POD Go), Fractal (Axe-FX III, FM3, FM9), Kemper, TONEX, Headrush Prime

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.