BNSN CHMR – Tone Match Gen2 Presets and Captures

$19.99

Presets and captures based on our Benson Chimera

Available for:

  • Line 6 Helix, HX Stomp, POD Go
  • Fractal Axe-FX III, FM3, and FM9
  • TONEX and Amplitube
  • Quad Cortex
  • Headrush Prime
  • Kemper (Profiler and Stage)

Description

This video showcases the Line 6 HX patches. Scroll down to hear individual demos for each unit.

TONE MATCH PATCHES, CAPTURES, AND PROFILES OF OUR BENSON CHIMERA

For these presets and captures, captured Benson Chimera amplifier. The result is a set of Tone Match impulse responses and captures that sound exactly like our amp, and the microphones, preamps, and EQ chains that we use to record it.

The Chimera is capable of a wide array of tones ranging from beautiful rich cleans to extremely music and harmonic breakup tones. We’ve profiled the Chimera with a Royer 121 and Earthworks SR25 (our favorite mic combination) through a stereo Neve 1073 preamp with EQ.

TONE MATCH (Gen 2) PATCHES (Applies to Line 6 and Fractal presets)

These are part of our ‘Tone Match’ line of patches. To create these patches, we make custom IR’s that ‘match’ the HX and Fractal amp models to our real-world amp. The result is the Line 6 and Fractal units sound almost exactly like our actual amplifiers.

The ‘Gen2’ indicates a new process we’ve used when Tone Matching our amplifiers that takes more of the amplifier’s cab and speaker into account, resulting in a more accurate tone match impulse response.

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

This download includes patches for Helix, HX Stomp, and POD Go. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

  • BNSN CHMR WT TM2 S – This patch uses the IR’s and is meant for guitars with single coils or low output humbuckers
  • BNSN CHMR WT TM2 H – This patch uses the IR’s and is meant for guitars with more traditionally voiced humbuckers

SIGNAL FLOW AND EFFECTS

  1. Input
  2. Compressor
  3. Pitch (POG)
  4. Drives: KOT, 808, Timmy
  5. Volume – mapped to EXP 2
  6. Tremolo
  7. Chorus
  8. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  9. Reverbs: Hall (subtle), Dynamic Hall (huge)
  10. Amps
  11. IR (Tone Match)
  12. EQ
  13. Solo Boost
  14. Output

The HX Stomp and POD Go presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

  • Snapshot 1: CLEAN. This is the base clean tone with delay.
  • Snapshot 2: DRIVE. Light overdrive.
  • Snapshot 3: DRIVE +: Bigger overdrive
  • Snapshot 4: P&W LEAD – Lead tone with lots of reverb and delay
  • Snapshot 5: AMBI CLEAN – Ambient Clean tone
  • Snapshot 6: 80s CLEAN– Clean tone with chorus
  • Snapshot 7: POG LEAD – Same as snap 4 but with POG
  • Snapshot 8: SWELLS – Big ambient swells

POD Go:

  • Snapshot 1: CLEAN. Base clean tone
  • Snapshot 2: DRIVE. Stage 1 drive tone
  • Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
  • Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots

Fractal Presets available for Axe-FX III, FM3, and FM9

This download includes patches for Axe-FX III, FM3, and FM9. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

  • BNSN CHMR TM2 WT SC – this preset is designed to work with single coil guitars
  • BNSN CHMR TM2 WT HB – this preset is designed to work with humbucker guitars

SIGNAL FLOW AND EFFECTS

  1. Input
  2. Compressor
  3. Pitch (POG)
  4. Drives: Timmy, 808, KOT (and more)
  5. Volume – mapped to EXP 2
  6. Tremolo
  7. Chorus
  8. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  9. Reverbs: Subtle and Huge
  10. Amps
  11. IR (Tone Match)
  12. Solo Boost
  13. Output

The FM3 presets cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SCENES

  • Scene 1: CLEAN. Basic clean tone with verb and quarter delay
  • Scene 2: DRIVE. Light Drive (Drive 1A)
  • Scene 3: DRIVE+. Med Drive (Drive A, Control Switch 1)
  • Scene 4: P&W LEAD. Big lead tone with delay and reverb
  • Scene 5: AMBI CLEAN. Clean tone with stereo delay (1/4 + 1/8d) and big reverb.
  • Scene 6: 80’s CLEAN. Clean tone with CHORUS
  • Scene 7: POG LEAD. Big lead tone like snap 4 but with POG
  • Scene 8: SWELLS. Big ambient tones

TONEX AMP CAPTURE PRESETS – Compatible with the Tonex/Amplitube Software and the TONEX pedal

For Tonex, we have captured the amp through its entire gain range of the amp. The Amp Model Presets and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

The demos above were created with the all-in-one presets included with this purchase. These presets utilize the amp captures, and no external effects were used – all QC effects blocks and captures.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amp. The captures and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

  1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (WorshipTutorials) will follow you on the app.
  2. Follow ‘WorshipTutorials’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
  3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
  4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

For Kemper, we have profiled the amp through its entire gain range of the amp. The Profiles and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 profiles.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances with options for both single coils and humbuckers.

HEADRUSH PRIME (not compatible with other Headrush units)

For Headrush Prime, we’ve included both rigs (patches) and amp clone(s).

Amp Clones Included

Our downloads include the Amp Clones of our actual amplifiers that we use to build the rigs.

Headrush Prime Signal Flow:

  1. Input
  2. Compressor
  3. Pitch
  4. Overdrive/distortion
  5. Volume
  6. Amp Clone
  7. Tremolo
  8. Chorus
  9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
  10. Reverbs: Subtle and Ambient
  11. Output

FOOTSWITCH CONFIGURATION

We’ve programmed the switches on the Headrush Prime to act like a traditional pedalboard. You’ll see individual effects mapped to the different buttons and labeled appropriately. If you’d like to make changes, the process is simple – the Headrush Prime manual provides great documentation if you’d like to create scenes or other button mapping.

Additional information

Platform

Line 6 (Helix, HX Stomp, POD Go), Fractal (Axe-FX III, FM3, FM9), TONEX, Quad Cortex, Kemper, Headrush Prime

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.