Divi13 – Line 6 POD Go Patch


Line 6 POD Go patch based on the Divided Duo (Divided by 13 JRT 9/15) amp model, including a premium IR cab.

Category: SKU: PGO-012


NOTE: This video demonstrates the Helix version of this patch, but the POD Go version contains many of the same elements. Scroll down to see what all is included.


1. UPDATE YOUR FIRMWARE: Please upgrade the firmware on your POD Go and POD Go Edit software from Line 6 to the latest before installing this patch. Even if your POD Go is up to date, the app needs to be updated as well. If you get an error importing a patch, the problem is most likely outdated firmware on your POD Go or POD Go Edit.

2. IR CABS INCLUDED: This download includes two premium IR Cabs. NOTE: The POD Go only allows you to use one at a time, but we’ve included two different IR’s to give you two tonal options. We love the way both of these IR’s sound (the Helix and Stomp patches use both of them at the same time), so feel free to experiment with both IR’s and pick your favorite.

Here are the included IR’s:

  • WT Match G12H30 121
  • WT 60s AC Silver 160

3. INCLUDED PATCHES: This download includes two patches:

  • Divi13 WT SC . patch is the main patch with IR cab suited for single coils or low output humbuckers
  • Divi13 WT HB . patch is the main patch with IR cab suited for traditionally voiced humbuckers
  • Divi13 WT. This is the main patch with a stock cab (we highly recommend the IR version)
  • Divi13 WT FX 1, FX2 These patches includes additional effects blocks from our full Helix patch (see signal chain section below to know what is included)

*We include the additional ‘FX’ patches so you can mix and match effects blocks to best suite your needs. These additional blocks include more drive, delay, reverb, and modulation options.


  1. Connect your POD Go to your computer using a USB Cable
  2. Download and instal the ‘POD Go Edit’ app from Line 6
  3. In the ‘POD Go Edit’ app, drag and drop the patch into a slot in the ‘PRESETS’ column
  4. To import an IR, switch to the ‘IMPULSES’ column (next to the PRESETS column), and drag & drop the IR into the appropriate slot (see note above). 
  5. PLEASE NOTE: If you do not have the IR loaded into the ‘IMPULSES’ column, the patch will not sound correct, even if you have the IR block on – you must drag and drop the IR into the IMPULSES column.


Divi13 WT IR, WT HB, and WT patches

  1. Input
  2. Wah – Not set up
  3. Rochester Comp – not mapped to a switch, always on
  4. Teemah! – mapped to foot switch A
  5. Volume (log curve) – mapped to EXP 2
  6. Amp – Dividied Duo – parameters mapped to foot switch B (see notes below)
  7. Cab/IR
  8. Cali Q Graphic – Always on EQ – Use this EQ to make tonal tweaks for your guitar/setup. These controls will affect your tone differently than the amp controls. See below for recommended settings.
  9. Transistor Tape Delay – parameters mapped to foot switch C (see notes below)
  10. Double Tank Verb – parameters mapped to foot switch D (see notes below)

Divi13 FX 1 PATCH:

  1. Input
  2. Volume (NOT USED)
  3. Wah (NOT USED)
  4. Amp (NOT USED)
  5. Cab (NOT USED)
  6. EQ (NOT USED)
  7. Kinky Boost
  8. Heir Apparent
  9. Reverse Delay
  10. Adriatic Delay – Dual delay  1/4 + Dotted 8th

Divi13 FX2 PATCH:

  1. Input
  2. Volume (NOT USED)
  3. Wah (NOT USED)
  4. Amp (NOT USED)
  5. Cab (NOT USED)
  6. EQ (NOT USED)
  7. Bubble Vibrato
  8. Tremolo
  9. Lo Res Delay (1/4 note)
  10. Plate Verb


This patch is meant to be used in either stompbox or snapshot mode. We recommend setting up your POD Go to use switches A, B, C, and D as stomps, and the left up/down switches to cycle through snapshots.

We have included additional ‘FX” patches so you can copy and paste the various effects blocks used in the full Helix version of this patch to suite your needs with the POD Go.


Foot switch B adjusts Drive parameters on the amp block. This gives you a true amp overdrive tone without the use of dirt pedals. If the base patch is too dirty for your preference, adjust the ‘Min Drive’ and ‘Max Drive’ settings on this button to suite your needs. The ‘Min Drive’ settings is when the button is off, and the ‘Max Drive’ setting is when the button is on. 


Foot switch C adjusts parameters in the Delay block: It gives you subtle delay in the ‘Min’ position and more ambient delay in the ‘Max’ position.


Foot switch D adjusts the following parameters in the Reverb block: Decay and Mix. In the off/min position you get a subtle reverb, and in the on position you get a big ambient reverb.


There are four snapshots included in this patch to get different sounds. They are:

  • Snapshot 1: CLEAN. This is the base clean tone with delay.
  • Snapshot 2: DRIVE. Light overdrive.
  • Snapshot 3: P&W LEAD: Big drive with delay and lots of verb. This is a typical P&W style drive.
  • Snapshot 4: CLEAN AMBI – Clean tone with big reverb and delay.



All guitars are different, so you may want to make changes to suite your playing style and guitar. We set this up with a variety of guitars, including both single coils and humbuckers (primarily a Telecaster style guitar). If your guitar has humbuckers, please refer to the suggested settings below.

We recommend making a copy of the patch and changing the copy just in case you want to revert back to the original. 

We’ve included both single coil and humbucker voiced patches to serve as starting points for your guitars. To make adjustments, we recommend starting with these parameters:

  • Amp Gain: Adjust the min/max values of the amp gain so that your guitar is slightly breaking up with big chords on the bridge position (without any drive pedals on)
  • Amp EQ controls: Adjust these to suite your individual guitars/taste
  • EQ block: This is a simple way to adjust the overall tonal characteristics of the patch.


If you would like to make this patch louder or quieter without affecting tone, the following adjustments can be made:

“Ch Vol” control on the amp module. This will increase or decrease volume without affecting the tone of the amp. This is the primary level adjustment tool I use for changing patch volumes.

Output block level. Changing the level control on the output block (the very last thing in the signal chain) will increase or decrease overall volume. We typically have this set at zero, but feel free to adjust this as you see fit.


Version 2.0: 2021-12-23

  • Added WT IR’s
  • Slight amp/EQ tweaks (better tone)

Version 1.0 (initial release): 2020-06-02


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.