65 Prince – Tone Match Presets and Captures

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

This download includes patches for Helix, HX Stomp, and POD Go. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

The pack includes 2 patches (each with SC and HB options). For the ‘A’ patches, we tone matched the amp using an Alessandro/Eminence 10” GA64 speaker. For the ‘O’ patches, we tone matched the amp through a vintage 60’s 10” Oxford speaker. The ‘A’ patches are a bit brighter and more scooped.

• 65 Prince A/O TM WT S – This patch uses the IR’s and is meant for guitars with single coils.
• 65 Prince A/O TM WT H – This patch uses the IR’s and is meant for guitars with humbuckers.
• NOTE: The HX Stomp and POD Go folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix patch.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Drives: KOT, 808, Dhyna Drive (Zendrive)
4. Volume – mapped to EXP 2
5. Tremolo
6. Chorus
7. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
8. Reverbs: Hall (subtle), Dynamic Hall (huge)
9. Amps
10. IR (Tone Match)
11. EQ
12. Output

The HX Stomp and POD Go patches cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: DRIVE+. Big rhythm tone
• Snapshot 4: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 5: AMBI CLEAN. Clean tone with lots of delay and verb
• Snapshot 6: CLEAN TREM. Clean tone with tremolo
• Snapshot 7: CLEAN CHORUS. Ambient clean tone with chorus
• Snapshot 8: SWELLS. Big ambient swells tone

POD Go:

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots

INCUDED PRESETS

This download includes patches for Axe-FX III, FM3, and FM9. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

The pack includes 2 presets (each with SC and HB options). For the ‘A’ presets, we tone matched the amp using an Alessandro/Eminence 10” GA64 speaker. For the ‘O’ presets, we tone matched the amp through a vintage 60’s 10” Oxford speaker. The ‘A’ patches are a bit brighter and more scooped.

• 65 Prince A/O TM WT SC – This patch uses the IR’s and is meant for guitars with single coils.
• 65 Prince A/O TM WT HB – This patch uses the IR’s and is meant for guitars with humbuckers.
• NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch (POG)
4. Drives: KOT, 808, Zendrive
5. Volume
6. Tremolo
7. Chorus
8. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
9. Reverbs: Hall (subtle), Dynamic Hall (huge)
10. Amps
11. IR (Tone Match)
12. EQ
13. Output

The FM3 presets cannot fit all the effects into a single patch. For that platform, we include the amp and essential effects in the main presets, and then we include the additional effects blocks in the ‘FX’ preset. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

BLOCK CHANNELS

For each effect block, we set up all four channels to give you as many options as possible for each individual effect types. For example, in the Compressor block, there are four different types of compression. For drives, we use all available channels in each drive block to get different overdrive flavors. Please experiment with the channels in all the different blocks to find your favorites. Typically we use our favorites in Channel A.

The exceptions to this are usually the amp and cab blocks – for those we usually only set up Channel A.

SCENES

The following scenes are set up for instant access to various tones:

• SCENE 1: CLEAN. Base clean tone
• SCENE 2: DRIVE. Stage 1 drive tone
• SCENE 3: DRIVE+. Big rhythm tone
• SCENE 4: P&W LEAD. Lead tone with lots of delay and verb
• SCENE 5: AMBI CLEAN. Clean tone with lots of delay and verb
• SCENE 6: CLEAN TREM. Clean tone with tremolo
• SCENE 7: CLEAN CHORUS. Ambient clean tone with chorus
• SCENE 8: SWELLS. Big ambient swells tone

The demos above were created with the all-in-one presets included with this purchase. These presets utilize the amp captures, and no external effects were used – all QC effects blocks and captures.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amp. The captures and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 capture.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (WorshipTutorials) will follow you on the app.
2. Follow ‘WorshipTutorials’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.

Coming soon…

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

For Kemper, we have profiled the amp through its entire gain range for both speaker options. The Profiles and are numbered – higher numbers mean more gain. The ‘Edge of Breakup’ settings that we like to use with a pedal board are usually the 2 and/or 3 profiles.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances with options for both single coils and humbuckers.

Coming soon…