2 RCK TS1 – Tone Match Gen2 Presets and Captures

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

This download includes patches for Helix, HX Stomp, and POD Go with options for both single coils and humbuckers. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

NOTE: The HX Stomp and POD Go folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix patch.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Drives
4. Volume – mapped to EXP 2
5. Amps
6. IR
7. Tremolo
8. Chorus
9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
10. Reverbs: Hall (subtle), Dynamic Hall (huge)
11. Output

The HX Stomp and POD Go patches cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

CHANNEL SWITCHING

In order to replicate the experience of playing this amp, we’ve set up a button to engage the overdrive channel of the amp block. We are using the GSG100 amp model, which is also a Dumble ODS clone. You’ll get beautifully rich amp overdrive when engaging this channel.

SNAPSHOTS

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: DRIVE+. Big rhythm tone
• Snapshot 4: DMBL Lead. This snapshot turns on the overdrive channel of the amp
• Snapshot 5: AMBI CLEAN. Clean tone with lots of delay and verb
• Snapshot 6: AMBI MOD. Clean tone chorus
• Snapshot 7: P&W LEAD: Lead tone big wet FX
• Snapshot 8: SWELLS. Solo tone with fewer reverb and delay effects

POD Go:

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots.

Fractal Presets available for Axe-FX III, FM3, and FM9

This download includes patches for Axe-FX III, FM3, and FM9 with options for both single coils and humbuckers. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch
4. Drives
5. Volume
6. Amp
7. User Cab
8. Tremolo
9. Chorus
10. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
11. Reverbs: Hall (subtle), Dynamic Hall (huge)
12. Output

The FM3 presets cannot fit all the effects into a single patch. For that platform, we include the amp and essential effects in the main presets, and then we include the additional effects blocks in the ‘FX’ preset. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

BLOCK CHANNELS

For each effect block, we set up all four channels to give you as many options as possible for each individual effect types. For example, in the Compressor block, there are four different types of compression. For drives, we use all available channels in each drive block to get different overdrive flavors. Please experiment with the channels in all the different blocks to find your favorites. Typically we use our favorites in Channel A.

The exceptions to this are usually the amp and cab blocks – for those we usually only set up Channel A.

CHANNEL SWITCHING

In order to replicate the experience of playing this amp, we’ve set up a button to change the gain of the amp block (we are using the Dumble ODS amp model). This replicates the overdrive tone of the amp. You’ll get beautifully rich amp overdrive when engaging this button.

SCENES

• Scene 1: CLEAN. Base clean tone
• Scene 2: DRIVE. Stage 1 drive tone
• Scene 3: DRIVE+. Big rhythm tone
• Scene 4: DMBL Lead. This scene turns up the overdrive of the amp
• Scene 5: AMBI CLEAN. Clean tone with lots of delay and verb
• Scene 6: AMBI MOD. Clean tone chorus
• Scene 7: P&W LEAD: Lead tone big wet FX
• Scene 8: SWELLS. Solo tone with fewer reverb and delay effects

In the output block under the ‘Scene Levels’ tab, we’ve adjusted the output level for various scenes. Adjust these to suite your needs.

TONEX AMP CAPTURE PRESETS – Compatible with the Tonex/Amplitube Software and the TONEX pedal

For Tonex, we have captured the amp through its entire gain range of the amp.The tone model captures increase through the entire gain range of the amp for both the clean and lead channels.

The Tone Model presets are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amp. The captures increase through the entire gain range of the amp for both the clean and lead channels.

The captures are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (WorshipTutorials) will follow you on the app.
2. Follow ‘WorshipTutorials’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

For Kemper, we have profiled the amp through its entire gain range of the amp. The profiles increase through the entire gain range of the amp for all channel options.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances with options for both single coils and humbuckers.

HEADRUSH PRIME (not compatible with other Headrush units)

For Headrush Prime, we’ve included both rigs (patches) and amp clone(s).

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch
4. Drives
5. Volume
6. Amp Clone
7. Tremolo
8. Chorus
9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
10. Reverbs: Subtle and Ambient
11. Output

BUTTON CONFIGURATION

We’ve programmed the buttons on the Headrush Prime to act like a traditional pedalboard. You’ll see individual effects mapped to the different buttons and labeled appropriately. If you’d like to make changes, the process is simple – the Headrush Prime manual provides great documentation if you’d like to create scenes or other button mapping.