CHIME:30 – Line 6 HX Stomp Patch

This demo is for the Helix patch. The HX Stomp patch contains the same base elements – see below for exactly what is included in the HX Stomp version.

IMPORTANT NOTES

1. UPDATE YOUR FIRMWARE: Please upgrade the firmware on your HX Stomp and the HX Edit software from Line 6 to the latest before installing this patch. Even if your HX Stomp is up to date, the ‘HX Edit’ app needs to be updated as well. If you get an error importing a patch, the problem is most likely outdated firmware on your HX Stomp/HX Edit. NOTE: You’ll need at least version 2.82 of both.

2. REVERBS: The 2.6 Firmware update changed the mix levels of the new (HX) reverbs. This patch accounts for those changes, so if you are not updated to 2.6 or later on your HX Stomp, the reverbs will not sound right.

3. IR CAB INCLUDED: This download includes premium IRs from Tone Junkie. We matched these specific IRs to this amp, but feel free to experiment with other IR’s for different tonal options. We’ve also included a stock cab version of the patch, but we urge to try the IR – it really does sound better – and it’s included for free :).

Here are the specific IRs included, and their location in our Stomp:

• TJ 30 MATCH 25 R121 (top row). In our Helix, it’s in IR slot 30 (this will always correspond with the number after ‘TJ’ in the file name).
• TJ 21 MATCH 25 R121+57 (bottom row). In our Helix, it’s in IR slot 21 (this will always correspond with the number after ‘TJ’ in the file name).

To purchase more IR packs, visit the Tone Junkie store here.

HOW TO IMPORT THIS PATCH AND IR

1. Connect your HX Stomp to your computer using a USB Cable
2. Download and instal the ‘HX Edit’ app from Line 6
3. In the ‘HX Edit’ app, drag and drop the patch into a slot in the ‘PRESETS’ column
4. To import an IR, switch to the ‘IMPULSES’ column (next to the PRESETS column), and drag & drop the IR into the appropriate slot (see note above). The image below shows the specific IR location for this patch.
5. PLEASE NOTE: If you do not have the IR loaded into the ‘IMPULSES’ column, the patch will not sound correct, even if you have the IR block on – you must drag and drop the IR into the IMPULSES column. (the image below shows a  patch, but the HX Stomp patch workflow is exactly the same)

SIGNAL FLOW AND EFFECTS

This download includes four patches.

• The ‘CHIME 30 WT IR’ patch is the main patch with IR cabs
• The ‘CHIME 30 WT’ patch is the main patch with a stock cab (we highly recommend the IR version with the included IR from Tone Junkie)
• The ‘CHIME 30 WT FX 1 and CHIME 30 WT FX 2’ patches include the additional effects that are in the full Helix version of this patch. Feel free to swap any of these effects into the main patch to best suite your setup.

CHIME 30 WT IR and CHIME 30 WT patches:

1. Input (Main L/R)
2. Glitz Verb  – Ambient reverb – mapped to FS1
3. Amp 1 – Matchstick Jump
4. Amp 2 – A30 Fawn Brt
5. Cabs/IR’s – see above for IR info
6. Simple EQ– Always on EQ – Use this EQ to make tonal tweaks for your guitar/setup. These controls will affect your tone differently than the amp controls. See below for recommended settings.
7. Output (Main L/R)

CHIME 30 WT FX 1 patch:

1. Input (Main L/R)
2. Deluxe Comp
3. Heir Apparent – Prince of Tone (voiced to sound like Bradford’s KOT, Yellow side)
4. Heir Apparent – Prince of Tone (voiced to sound like Bradford’s KOT, Red side)
5. Scream 808 – Tube Screamer
6. Vintage Digital Delay – 1/4 Delay
7. Transistor Tape Delay – dotted 8th Delay
8. Output (Main L/R)

CHIME 30 WT FX 2 patch:

1. Input (Main L/R)
2. Dual Delay (1/8d + 1/4)
3. ’Plate – subtle plate reverb
4. Glitz Verb – bigger modulated verb
5. Trinity Chorus – mapped to button labeled ‘Chorus’
6. Output (Main L/R)

USAGE

We built this patch assuming you will be integrating HX Stomp into an existing effects rig, using it to replace an amp with the option of additional effects. It includes the base tone components from the full Helix version of this patch.

MAKING ADJUSTMENTS FOR YOUR SETUP

SETTING THE PATCH UP FOR YOUR GUITAR

All guitars are different, so you may want to make changes to suite your playing style and guitar. We set this up with a variety of guitars, including both single coils and humbuckers (primarily a Telecaster style guitar). If you’re using a guitar with humbuckers, please refer to the suggested settings below.

We recommend making a copy of the patch and changing the copy just in case you want to revert back to the original.

RECOMMENDED SETTINGS FOR SINGLE COILS:

The version of this patch you initially download is voiced more toward single coils. We built it primarily using a Telecaster style guitar. If you have a humbucker equipped guitar with low-output humbuckers, it should be perfect for your uses too.

RECOMMENDED SETTINGS FOR HUMBUCKERS:

If your guitar has traditional output Humbuckers, try the following changes (we recommend making a copy of the original patch)…

MATCHSTICK CH1 AMP SETTINGS:

• Drive: Change to 1.8
• Cut: Change to 1.1

LITIGATOR AMP SETTINGS

• Drive: Change to 1.6
• Bass: Change to 2.1
• Mid: Change to 5.7
• Presence: Change to 4.1

Cali Q Graphic block settings:

• 240 Hz Slider: Change to +0.7
• 2200 Hz Slider: change to +2.3
• 6600 Hz Slider: change to +1.9

VOLUME CHANGES

If you would like to make this patch louder or quieter without affecting tone, the following adjustments can be made:

“Ch Vol” control on the amp module. This will increase or decrease volume without affecting the tone of the amp. This is the primary level adjustment tool I use for changing patch volumes.

Output block level. Changing the level control on the output block (the very last thing in the signal chain) will increase or decrease overall volume. We typically have this set at zero, but feel free to adjust this as you see fit.

CHANGELOG

Version 1.0 (initial release): 2019-12-31