Small Amps Pack – Tone Match Gen2 Presets and Captures

Line 6 Patches available for Helix (floor, LT, and Native), HX Stomp (including Stomp XL), and POD Go.

You get separate patches for each of the three amplifiers, all the ‘SC’ and ‘HB’ options. The effects layouts in all the patches is similar, but the amp and IR blocks make them unique. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

NOTE: The HX Stomp and POD Go folders include ‘FX” patches. These patches include the additional effects blocks from the full Helix patch.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Drives
4. Volume – mapped to EXP 2
5. Amp, TM2 IR
6. EQ
7. Tremolo
8. Chorus
9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
10. Reverbs: Hall (subtle), Dynamic Hall (huge)

The HX Stomp and POD Go patches cannot fit all the effects into a single patch. For those platforms, we include the amp and essential effects in the main patches, and then we include the additional effects blocks in the ‘FX’ patches. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

SNAPSHOTS

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: DRIVE+. Big rhythm tone
• Snapshot 4: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 5: AMBI CLEAN. Clean tone with lots of delay and verb
• Snapshot 6: TREM CLEAN. Clean tone with tremolo
• Snapshot 7: AMBI MOD. Ambient lean tone with chorus 
• Snapshot 8: SWELLS. Solo tone with fewer reverb and delay effects

POD Go:

• Snapshot 1: CLEAN. Base clean tone
• Snapshot 2: DRIVE. Stage 1 drive tone
• Snapshot 3: P&W LEAD. Lead tone with lots of delay and verb
• Snapshot 4: AMBIENT. Ambient clean tone

NOTE: The HX Stomp patches do not include Snapshots.

Fractal Presets available for Axe-FX III, FM3, and FM9

You get separate presets for each of the three amplifiers, all with ‘SC’ and ‘HB’ options. Please make sure to import the appropriate patch for your hardware – they are not interchangeable.

NOTE: The FM3 folder includes an ‘FX” patch. This patch includes the additional effects blocks from the full Axe-FX and FM9 patches. Feel free to substitute any of these effects blocks into the main patch to suite your needs.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch
4. Drives
5. Volume
6. Amp, User Cab (TM Gen2) IR
7. Tremolo
8. Chorus
9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
10. Reverbs: Hall (subtle), Dynamic Hall (huge)
11. Output

The FM3 presets cannot fit all the effects into a single patch. For that platform, we include the amp and essential effects in the main presets, and then we include the additional effects blocks in the ‘FX’ preset. Feel free to mix and match the additional ‘FX’ blocks into the main patches to suite your needs.

BLOCK CHANNELS

For each effect block, we set up all four channels to give you as many options as possible for each individual effect types. For example, in the Compressor block, there are four different types of compression. For drives, we use all available channels in each drive block to get different overdrive flavors. Please experiment with the channels in all the different blocks to find your favorites. Typically we use our favorites in Channel A.

The exceptions to this are usually the amp and cab blocks – for those we usually only set up Channel A.

SCENES

• SCENE 1: CLEAN. Base clean tone
• SCENE 2: DRIVE. Stage 1 drive tone
• SCENE 3: DRIVE+. Big rhythm tone
• SCENE 4: P&W LEAD. Lead tone with lots of delay and verb
• SCENE 5: AMBI CLEAN. Clean tone with lots of delay and verb
• SCENE 6: TREM CLEAN. Clean tone with tremolo
• SCENE 7: AMBI MOD. Ambient lean tone with chorus 
• SCENE 8: SWELLS. Solo tone with fewer reverb and delay effects

TONEX AMP CAPTURE PRESETS – Compatible with the Tonex/Amplitube Software and the TONEX pedal

For Tonex, we have captured the amp through its entire gain range of the amps (each amp is captured individually).The tone model captures increase through the entire gain range of the amps for all available channels.

The Tone Model presets are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals.

QUAD CORTEX CAPTURES

For Quad Cortex, we have captured the amp through its entire gain range of the amps (you get captures and presets for each amp). The captures increase through the entire gain range of the amp for all available channels.

The captures are numbered, and the number corresponds to the level of gain in the tone model. Lower numbers equal lower gain, and higher numbers equal higher gain. Typically a ‘2’ or ‘3’ is the ‘edge of breakup’, and is the perfect option to use with pedals.

ALL-IN-ONE PRESETS

Also included are gig-ready (Sunday morning ready, to be more precise) all in one presets utilizing captures of this amp and our drive pedals. We’ve included separate presets for both single coil quipped and humbucker equipped guitars. You can use these presets in both Scene and Stomp mode, and they cover a ton of sonic territory.

HOW DO YOU GET THE CAPTURES?

When you place your order, we will need to manually send you the captures through the ‘Cortex Cloud’ app by Neural DSP, available for both iOS and Android devices. First, you need to have the app installed and you must have an account through the app (go here to create an account and access the app).

This is how we will send you the captures:

1. Please include your Cortex Cloud app username in the ‘Notes’ field when checking out. If you do not include this, we cannot send you the captures. After we receive your order, we (WorshipTutorials) will follow you on the app.
2. Follow ‘WorshipTutorials’ on the Cortex Cloud app. This will make us ‘friends’ through the app :). If you are not following us, we cannot send you the captures.
3. After we receive your order, and we ‘Friends’ on the app, we will send you the captures through the app. We bundle the captures into presets, so you will receive one (or more) presets that include all the captures. You will find the captures in the ‘Shared with me’ section on your Quad Cortex.
4. Please allow up to 5 business days for us to send you the captures. Most orders will be fulfilled within two business days or less. This fulfillment process must happen manually – we will do our best to get you the files quickly. Once the NDSP marketplace opens, this process may change.

KEMPER PROFILES AND PERFORMANCES – Compatible with the Kemper Head and Stage products

For Kemper, we have profiled the entire gain range of the amps (each amp was profiled individually). The profiles increase through the entire gain range of the amps for all channel options.

KEMPER PERFORMANCES

We’ve also included fully featured Kemper performances for each amp with options for both single coils and humbuckers.

HEADRUSH PRIME (not compatible with other Headrush units)

For Headrush Prime, we’ve included both rigs (patches) and amp clone(s) for all three amps.

SIGNAL FLOW AND EFFECTS

1. Input
2. Compressor
3. Pitch
4. Drives
5. Volume
6. Amp Clone
7. Tremolo
8. Chorus
9. Delays: 1/8 delay, Dotted 8th delay, Dual stereo delay
10. Reverbs: Subtle and Ambient
11. Output

BUTTON CONFIGURATION

We’ve programmed the buttons on the Headrush Prime to act like a traditional pedalboard. You’ll see individual effects mapped to the different buttons and labeled appropriately. If you’d like to make changes, the process is simple – the Headrush Prime manual provides great documentation if you’d like to create scenes or other button mapping.