Holy Water – We The Kingdom – Line 6 Helix Patch

$5.99

Line 6 Helix patch for the song Holy Water by We The Kingdom, including premium IR cabs. Organized into snapshots, you can get the sounds from the album at the push of a button.

Categories: , SKU: HLS-068

Description

IMPORTANT NOTES

1. UPDATE YOUR FIRMWARE: Please upgrade the firmware on your Helix and the HX Edit software from Line 6 to the latest before installing this patch. Even if your Helix is up to date, the ‘HX Edit’ app needs to be updated as well. If you get an error importing a patch, the problem is most likely outdated firmware on your Helix/HX Edit.

2. IR CABS INCLUDED: This download includes premium IR Cabs. We matched these specific IRs to this amp, but feel free to experiment with other IR’s for different tonal options. We’ve also included a stock cab version of the patch, but we urge to try the IRs.

Here are the IRs included:

  • WT Match LC G12 H SR25 (top row)
  • WT Match LC G12 H 160 (bottom row)

Helix should recall the IR based on its name rather than slot number, so it shouldn’t matter which slot you import the IR into. To purchase additional IR packs, visit Worship Tutorials.

INCLUDED PATCHES

This download includes the following patches:

  • Holy Water WT SC: This is the main patch set up for guitars with single coil pickups or low output humbuckers.
  • Holy Water WT HB: This is the same as the first patch but set up for traditional or higher output humbuckers.
  • Holy Water WT: This is the same as the first patch but using stock cabs

HOW TO IMPORT THIS PATCH AND IR

  1. Connect your Helix to your computer using a USB Cable
  2. Download and instal the ‘HX Edit’ app from Line 6
  3. In the ‘HX Edit’ app, drag and drop the patch into a slot in the ‘PRESETS’ column
  4. To import an IR, switch to the ‘IMPULSES’ column (next to the PRESETS column), and drag & drop the IR into an available slot.  PLEASE NOTE: If you do not have the IR loaded into the ‘IMPULSES’ column, the patch will not sound correct, even if you have the IR block on – you must drag and drop the IR into the IMPULSES column.

SNAPSHOTS

There are eight snapshots included in this patch to get different sounds (all patches feature the same snapshots).

They are:

  • SNAPSHOT 1:  INTRO: Light drive with Leslie and reverb
  • SNAPSHOT 2: RIFF OCTAVE: Big drive with octave down and reverb
  • SNAPSHOT 3: VS LESLIE: Clean tone with Leslie and reverb
  • SNAPSHOT 4: RHY TREM: Big rhythm tone with tremolo
  • SNAPSHOT 5: CH/RHY BIG: Big rhythm tone
  • SNAPSHOT 6: BRIDGE CLEAN: Clean tone
  • SNAPSHOT 7: BRDG PUSH: Light OD
  • SNAPSHOT 8: BR OCTAVE: Big drive with octave up

SIGNAL FLOW AND EFFECTS

  1. Input
  2. Deluxe Comp – not mapped to a switch, always on
  3. Dual Pitch – mapped to switch labeled ‘Octave” (Parameters controlled by Snapshots)
  4. Compulsive Drive – OCD – mapped to switch labeled ‘OCD’
  5. KWB Drive -mapped to button labeled ‘KWB’
  6. Dhyna Drive – mapped to a button labeled ‘ZenDrive’
  7. 145 Rotary – Leslie – mapped to a button labeled ‘Leslie’ (the Speed parameter is mapped to a button labeled ‘Leslie Speed’ – press this to ramp the speed between fast and slow)
  8. Volume – Mapped to EXP 2
  9. Transistor Tape- 1/8 delay – mapped to switch labeled ‘1/8 DLY’
  10. Transistor Tape- 1/8d delay -mapped to switch labeled ‘1/8d Tape’
  11. Dynamic Hall – Big reverb – mapped to a switch labeled ‘Dynamic Hall’
  12. Tremolo – mapped to a button labeled ‘Trem’
  13. Volume – mapped to EXP 2
  14. Amps – Tweed Blues Brt
  15. Cabs/IR’s – see above for IR info
  16. Cali Q Graphic – Always on EQ – Use this EQ to make tonal tweaks for your guitar/setup. These controls will affect your tone differently than the amp controls.
  17. ’Plate – subtle plate reverb – mapped to a switch labeled ‘Plate Verb’

USAGE

This patch is meant to be used in Snapshot mode but can be used in Stomp mode as well. We recommend setting up your Helix to use all ten stomps (stompbox mode) or all eight snapshots (snapshot mode). The Helix LT does not allow 10-button stomp mode, so you’ll have to re-arrange the button assignments to suite your preferences.

AMP PUSH SWITCH:

We have mapped the ‘Drive’ parameters on the amp blocks to the switch labeled ‘Amp Gain’. This gives you a pure amp overdrive which we think sounds better than using a drive pedal.

STEREO:

This patch is set to output in stereo. If you’re using just the Left output, Helix will automatically sum to mono.

MAKING ADJUSTMENTS FOR YOUR SETUP

SETTING THE PATCH UP FOR YOUR GUITAR

All guitars are different, so you may want to make changes to suite your playing style and guitar. We set this up with a variety of guitars, including both single coils and humbuckers (primarily a Telecaster style guitar). If your guitar has humbuckers, please refer to the suggested settings below.

We recommend making a copy of the patch and changing the copy just in case you want to revert back to the original. 

We’ve included both single coil and humbucker voiced patches to serve as starting points for your guitars. To make adjustments, we recommend starting with these parameters:

  • Amp Gain: Adjust the min/max values of the amp gain so that your guitar is slightly breaking up with big chords on the bridge position (without any drive pedals on)
  • Amp EQ controls: Adjust these to suite your individual guitars/taste
  • Cali Q Graphic EQ block: This is a simple way to adjust the overall tonal characteristics of the patch.

VOLUME CHANGES

If you would like to make this patch louder or quieter without affecting tone, the following adjustments can be made:

“Ch Vol” control on the amp module. This will increase or decrease volume without affecting the tone of the amp. This is the primary level adjustment tool I use for changing patch volumes.

Output block level. Changing the level control on the output block (the very last thing in the signal chain) will increase or decrease overall volume. We typically have this set at zero, but feel free to adjust this as you see fit.

CHANGELOG

Initial Release (Version 1.0): 2022-02-17

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.